INTRODUCING

• S1-Package of 6 assorted sizes and colors
  
• 8,12 & 16 inches x 1 1/2 inch width; NEON colors
  
• 8,10 & 12 inches x 1 inch width bright colors
  
• Useful in organizing and hanging coiled products like:
  
• Electrical Cords, ropes, cables & hoses in shop, garage
  or van
  
• Untangle that coiled mess!! !
  
• Small electric tools with their cords; !
  
• Drills, screwguns, sanders, jig saws, grinders etc...
  
• ! ! !

Made in the U.S.A
Thousands of uses!
Promotional, Imprinted, Custom !
Other sizes, width, length or colors made to order

Price: $8.99

Iron-on Emblems and Iron-on patches. Iron-on patches measure 1" high by 6"+/- wide in red white and blue.

Price: $2.00

Model 12-O For gardening or specialty tools and equipment, hobby and craft tools. Model 12-O measures 12"L x 5"W x 9"H

Price: $26.95

Model 18-V A smaller version of the 20-V with 18 pouches (9 on each side). Model 18-V measures 15"L x 5"W x 9"H

Price: $31.25

Model 20-V A variation of the 24-O, 20 pouches (10 on each side) with hook and loop top closure. This pouch stays open when set down and has the same sturdy webbed canvas carrier handles. Made of the same 24 oz. canvas as the 24-O. Protects and covers your tools Model 20-V measures 18"Lx 6" W x 11" H

Price: $41.95

Model 24-O The Original Organizer Made of heavy-duty 24 oz. cotton duck & containing 24 pouches of various sizes. The heavy canvas allows it to stay open and accessible even when empty. Two sturdy webbed canvas carrier handles allow you to easily carry over 80 pounds of tools and equipment with the ease of carrying a briefcase! Model 24-O measures 17"L x 6"W x 9"H

Price: $46.95

Model 24-OSS The Original Tool Organizer With an adjustable canvas shoulder strap. It enables you to distribute the weight when fully loaded with tools and/or equipment. If you would like to carry your tools over your shoulder, then the 24-OSS is for you! Model 24-OSS measures 17"L x 6"W x 9"H

Price: $52.50

Model 5-V An answer to storing and carry-ing small parts fast-eners. Four man-size inner-pouches, hook and loop closure on top, so the pouch closes tight when squeezed together. Excellent combo carrier: pop rivet gun and an assortment of rivets, staple gun and assortment of staples, nail punch, trim hammer and finish nails, lump hammer and masonry nails, wire ties and wire tie tool, hand gun and bullets, common nails, deck screws, sheetrock screws, mollys, toggels, lags, nuts, washers, bolts, anchors, drive pins, lead sinkers, fish hooks, wire nuts, power shots & pins, bingo buttons, mark the contents on the front with magic marker. Model 5-V measures 12.5"L x 4"W x 7"H

Price: $23.00

Model BP Two pouches in one. Two large pockets for holding two different fasteners. Pouches are large enough for hands that look like a catchers mit. Attaches to your tool belt with two nylon belt loops. The same 24 oz. duck. Bottom of belt pouch is rounded so contents won't stick in corners. Available with or without Nylon Tool Belt. Model BP measures 7 1/2" W x 8" H.

Price: $9.95

Model CBL? The Large Carpet Bagger Made of #4 Duck (24 oz. cotton canvas). Inside two large pouches secured with hook and loop closure. Two sturdy WEB CANVAS Carry Handles. Continuous hook and look top closure. Plenty of room for large electrical hand tools: Drills, Nibblers, Shears, Jig Saw, Plus inside pouches for accessories. Double canvas bottom. Model CBL measures 20"L x 7"W x 11.5"H

Price: $32.95

Model CBS? The Small Carpet Bagger Made of same #4 Duck. For smaller specialty tools. Also, with two inner pouches to protect and cover your accessories. Continuous hook and loop closure. Same heavy web canvas, handles. Great for Crafts and Rock Hounds. Double canvas bottom. Model CBS measures 14"L x 5"W x 10"H

Price: $27.95

Model CP Utility Pouch [FREE OFFER} (See Bottom) Perfect for cell phones, tone generators, meteres, instrument case. Made of lamenated "Cordura" Nylon (lightly padded) Easy release hook and loop belt holder will fit up to a 3" wide belt. Model CP Measures 3" W x 4" H x 1 1/2" D. One CP FREE with every purchase over $50.00

Price: $9.99

Model DA - Denim Apron Made of 10 oz. denim with three lower pockets, pencil and glasses pocket at top. Nylon belt and neck straps have plastic buckels to adjust straps. Model DA Measures 22-1/2" wide by 28" long.

Price: $24.00

Model HOL - Nylon Tool Holster Capable of holding battery operated drills and screw guns. Contains: three auxiliary pouches for misc. tools like screw drivers, punches, awls, etc. Attaches to your tool belt by two built-in loops on back. Available with or without Nylon Tool Belt. Model HOL Nylon Belt Extra.

Price: $15.95

Model HU/C Pouch 12" wide by 18" high, made of 24oz. cotton duck, with four 5-1/4"wide by 7" high expandable individual pouches of 10 oz. canvas, closable with hook and loop strips. Pouch can be hung up and supported at two (with nails or hooks) "D" rings or carried by canvas handle after pouched is secured with attached red hook and blue loop straps. Each pouch can hold several pounds of parts/fasteners/whatever. Use black magic marker to identify pouch contents. Model HU/C empty weight 9-1/2 oz.

Price: $26.95

The Largest Custom Canvas Tool Carrying Bag Made in the USA Made of 24 oz. duck. For contractors, yacht & boat owners, surveyors, emergency services. Fire and police departments. Carries a heavy load. Available with or without adjustable shoulder strap. Holds power electric saws, 1/4", 3/8", 1/2" drills, jig saws, routers, extension cords, 24" pipe wrenches, 2-150' x 11/2" fire hoses, hose nozzles, spanner wrenches, large prying tools & bars, bolt cutters, large coils of rope, hand cranks for sail wenches, 5 & 10 lb. lump hammers, wooden surveyor stakes, plumb bobs, measuring chains & tapes, gloves, face masks, hard hats, first aid kits, etc. Model HY-O measures 18"L x 10"W x 15"H

Price: $96.95

Model MO, The Mason's Organizer Made of 24 oz. duck. At last, all a mason's tools and levels can be carried with ease together!! 14 inside pouches for trowels of all shapes (brick, plaster, cement finishing, pointing, margin) and sizes! Holds brick, toothed, pointed and bull chisels! Also, stores your joiners, hawks, lines & line pins, rulers, tapes, edgers, floats, crayons, wrenches, plyers, line-holders, hammers, brushes, rags, gloves and sponges. PLUS, outside pouches designed to hold rulers, pencils and twigs.

• Two level holders on the back side can hold one 4' and one 2' or 3' level
• Two large wrap around handles makes it easy to carry
• Available with or without adjustable shoulder strap.

Model MO measures 20"L x 6"W x 14"H

Price: $97.95

Model NA - Nail Apron This natural heavy duck apron is made of 24 oz. cotton canvas, measures 20-1/2" wide by 10-1/2" high. It has three pouches, center is 5-1/2" with each end pouch measuring 6+", all three are 6-1/2" deep, plenty deep enough for several pounds of nails. The one inch wide nylon belt has a snap lock ketch, squeese to open, and is long enough to fit a 50" waist. Model NA weighs 8-1/2 oz.

Price: $13.00

Model NTB ? Adjustable Heavy Duty Nylon Tool Belt. For use with products PHO, BP, SP & HOL Model NTB measures 2" x 58"

Price: $20.95

Model PHO Nylon Paper Hanger Organizer 5 special size pouches on exterior, one on each end carries your tools: sponge, scissors, razor, straight edge, pencils, tape measure, roller, smoother and brush. Heavy duty nylon, snap swivel and belt loops. Available with or without Nylon Tool Belt. Model PHO measures 9"L x 3"W x 8"H

Price: $29.99

Model TO Trunk Organizer Van, car or truck container for all the small items scattered around your vehicle. Maps, gloves, flashlite, flares, rags, aspirin, hand cleaner, first aid kit, jumper cables, and handiwipes. Model TO measures 16"L x 6"W x 10"H

Price: $35.35

Model TP Tape measure pouch, perfect for 16' - 30' tape rules. Made of Cordura Nylon in black. Easy release Hook and Loop attatches to belt, will fit up to a 3" wide belt. Weight 2 ozs. Model TP measures 3 3/4" W x 3 1/2" H x 1 5/8" D.

Price: $14.95

Model TR-11 Graduated Tool Wrap Graduated Tool Wrap An eleven pouch gradu-ated tool wrap. Suitable for a variety of tools: Chisels, open end or box wrenches, punches, files, screw drivers, plyers, art brushes and sculpting tools. Get two, separate metric from standard. Rolls up & fastens with hook & loop strip. Model TR-11 measures 14"W x 10"H, 12 oz. duck

Price: $16.95

Model TR-13 Tool Wrap A thirteen pouch tool wrap with three large pouches for tin snips and other similar tools, six medium size pouches for plyers, dikes, chisels, and other medium size tools. Four thin pouches for screw drivers, files, awls and other similar tools. Cover folds over to protect tools. Rolls up tight, fastens with hook & loop strip. The TR-13 fits inside all of our larger models. Model TR-13 measures 14"L x 20"W, 24 oz. duck

Price: $17.95

Model TR-24 Model TR-24 is made of 10 oz. canvas and has 12 pockets on each half. One side has pockets for standard open/box end wrenches from 1/4" to 1". The opposite side has 12 pockets for metric wrenches, 7,8,9,10, small pockets, then 11,12,13,14,15,18,19 and 22mm. Model TR-24 secures with a hook & loop strap.

Price: $31.00

Model TR-24-M/S (Stenciled) Model TR-24-M/S is the same as Model TR-24 but is stenciled with wrench sizes for each pocket and each side is identified as Metric, Standard. Model TR-24-M/S secures with a hook and loop strap.

Price: $33.50

Model W-E Wireman/Electrician's Pouch as shown in black. Perfect for electricians, wireman, alarm, or electrical mechanics. Made of Corura Nylon with 4-hook and loop cover flaps for tools. Includes: Attatched cell phone pouch, instrument pouch (for tone generator), sissors pouch, lined knife pouch, two pouches for tools up to 6" long (ie: adjustable wrench, short screw drivers, etc.) 12 large pouches for tools up to 11" long, two 2" high plastic "D" rings on each side for more add on tools and hanging electrical/colored tape holder on right side of Pouch. Three easy release hook and loops attatch to belt, will fit up to a 3" wide belt. Weight empty, approx. 18 oz. Model W-E measures 14 1/2" W x 11 1/2" H x 3" D.

Price: $97.95